APL Hifi DSD-MR SE

The DSD-MR MK2 is our top-line Digital to Analog converter, specifically made for the most enthusiastic audiophiles who prefer analogue-like sound, comparable to state-of-the-art vinyl and respectable reel-to-reel machines.

It is an all-hand-made boutique, designed and built with the best possible audio quality in mind, cost-no-object.

Inspired by pure analog sound quality, the DSD-MR MK2 pleases with a very natural sonic character that is truly unique.

From the DSD512 processing rate to the differential transformer-coupled Class-A tube output stage, the DSD-MR proves technology and refinement of the highest level.

The DSD-MR MK2 is based on a modular design, allowing a cost-effective future upgradability of any internal stage.

Digital Processing
Proprietary asynchronous USB input module accepting PCM up to 384kHz/32 bit, up to DSD128 in DoP format and up to DSD512 in NativeDSD format.
Please note that both 44.1kHz and 48kHz based DSD data is accepted.
Proprietary PCM to DSD converter module with DSD128 and DSD256 capabilities, user selectable from the remote control.
DSD256 and DSD512 PCM to DSD conversion possible in Zero non-oversampling digital filter mode.
Proprietary Normal and Slow linear phase 64 bit user selectable digital filters for PCM processing.
Proprietary Pure DSD Digital to Analog conversion module. No off-the-shelf devices.
Ultra-low-jitter Femto Master Clocks.
Proprietary 10 pin RJ-45 input for connecting our DTR-MR digital transport or the DNP-SR network player.

Analog Output Stage
Custom Lundahl interstage and output transformers with Oxygen Free Copper windings.
Pure Class-A, Differential tube stage featuring ECC99 tubes.
Entirely passive current to voltage conversion and DSD analog filtering.
Zero Negative Feedback.
Non-magnetic resistors.
No capacitors on the signal path.
No Op Amps.
No mechanical contacts on the signal path.
Solid core Oxygen Free Copper internal wiring.

Power Supply
Oversized Custom P-Core balanced main power transformer.
Delayed High-Voltage supply, after tubes warm-up, for increased tubes life.
High quality Lundahl choke for the tube power supply.
High grade, specially selected rectifiers and passive components.

Convenience and mechanical
Large FLD display made by Noritake in Japan.
Custom selectable color filters for the display. Red, Blue and Green. Please specify when ordering.
Microprocessor control with last settings memory.
Aluminum Infrared Remote Control capable of controlling the DTR-MR digital transport and HAS-MR hybrid amplifier.
All-Aluminum enclosure with machined 20 millimeters thick front panel.

Digital Inputs
Two RCA Coaxial digital inputs.
AES/EBU professional standard balanced digital input.
TOSLINK Optical digital input.
Note! RCA, AES/EBU and Optical inputs accepting up to 192kHz/24bit PCM.
USB input accepting PCM up to 384kHz/32bit, up to DSD128 in DoP and up to DSD512 in NativeDSD format. Both 44.1kHz and 48kHz based DSD.
Note! All PCM rates from RCA, AES/EBU, Optical and USB digital inputs are converted to DSD128, DSD256 and DSD512 in Zero filter mode.
Two DTR inputs using balanced I2S transmission protocol for connecting to DTR-MR digital transport and DNP-SR network player.

Analog Outputs
Single Ended RCA outputs with top-line Furutech Rhodium plated RCA connectors.
Balanced XLR outputs with top-line Furutech Rhodium plated connectors.
Note! RCA and XLR outputs cannot be used simultaneously. Please select RCA or XLR from switch on the back.
Output level – 2.5V RMS at 0dBFS.
Output impedance – approximately 100 Ohms.

Power input and fuses
IEC power inlet made by Furutech NCF series.
115V or 230V / 50-60Hz, factory pre-set.
Other power input voltages available on request.
0.1A fuse for standby power supply.
2A special ceramic fuse.

Dimensions and weight
W450 x H120 x D380 millimeters.
Height with feet included – 140 millimeters.
Weight – 24.5kg unpacked.

Accessories
Infrared Remote Control.
User Manual.
Certificate of Authenticity.